Raspberry Pi WiFi Honeypot 🍯
This was a fun project to work on and build out. I learned a few new interesting tricks along the way. I started with this tutorial from 2013 by Andy Smith . However, a few things have changed with hostapd that I had to figure out through debugging. Also, the configuration of the nginx server as well as dnsmasq were slightly different for me using the new Raspbian Buster for Raspberry Pi 4. This should save you some time if you follow my trick tips later on in the article that I found by searching through various message boards and googling error messages as I did debugging to get this working properly. I have gone over setting up nginx servers in previous articles so if you need help with getting started these may be helpful. So first things first. I started with a canakit and assembled the raspberry pi with the appropriate heat sinks and a little fan set to a standard speed. The speed is adjusted by how you install the wiring. If you haven't done this before you can follow the ...